Company Logo

20in Metallic 1 to 50 Yard Rolls

20in Metallic 1 to 50 Yard Rolls

$9.79
Bulk pricing available. Select your options below to begin.

 
Clear

Notes

Earn up to 10 Points Points.

Product Description

Metallic Heat Transfer Vinyl

Add a Gleaming Chrome Effect to Your Designs!

Siser Metallic Heat Transfer Vinyl is perfect for adding a chrome look to your designs. This mirror like material is unlike anything you’ve seen before! Available in gold and silver, Metallic’s rich and shiny finish stands out from the crowd. Metallic looks great on caps, tote bags, and home décor such as pillow covers.
Please note that Metallic is a unique product and that cracking and delamination may occur after washing. The results are not predictable.

Metallic is  CPSIA Certified so it’s perfect for decorating children’s clothing and accessories.

 

1-4 Yards – $ 9.79 per yard
5-9 Yards – $ 8.82 per yard (for example 5 Yards would be $ 44.10)
10-24 Yards – $ 8.55 per yard (for example 10 Yards would be $ 85.50)
25-49 Yards – $ 7.77 per yard (for example 25 Yards would be $ 194.25)
50 Yards – $ 7.26 per yard (for example 50 Yards would be $ 363.00)

**Due to the manufacturing process, material may vary in width by 1/8-1/4″


Specifications

PVC composition Pressure sensitive backing Chrome-like finish
100 Microns/3.9 Mils 45°/60° blade Layering NOT recommended

Suggested Cutter Settings:

Cricut:
Blade: Standard
Setting: Light Cardstock

Silhouette Cameo:
Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 14

Scan N Cut:
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 3

Roland GS/GX-24:
Blade: 45°
Gram Force: 180g-190
Speed: 25-50 cm/s

Applications

Metallic Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather
Sublimated polyester

Heat Applications

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
• Cover and reheat for 2-3 seconds

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold

Care Instructions

Laundering:

Wait 24 hours before first wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean
No chlorine bleach