Company Logo

15in EasyWeed Extra (For Nylon) Sheets

15in EasyWeed Extra (For Nylon) Sheets

$3.50
Bulk pricing available. Select your options below to begin.

 
Clear

Notes

Earn up to 4 Points Points.

Product Description

EasyWeed® Extra Heat Transfer Vinyl

Our Best-Selling Heat Transfer Vinyl – Now for Nylon!

EasyWeed™ Extra has almost all the same great benefits of EasyWeed™ with the bonus of adhering to nylon! EasyWeed™ Extra is on a pressure-sensitive carrier which makes cutting detailed logos and designs a breeze. The ability to peel your designs HOT or COLD offers you the option to peel each item as it comes off the press, or to stack all applied garments and peel after the job is complete. Looking to provide multi-color designs for your customers? EasyWeed™ Extra – with its semi-gloss finish, can be layered, extending your creativity and allowing you to say “yes” to more complicated designs.

EasyWeed™ Extra is CPSIA Certified, so it’s perfect for decorating items intended for children.

**Due to the manufacturing process, material may vary in width by 1/8-1/4″

Specifications

PU Composition Pressure sensitive backing Semi-gloss finish
85 Microns/3.5 Mils 45°/60° blade Can be layered

Suggested Cutter Settings:

Cricut:
Blade: Standard
Setting: Iron-on

Silhouette Cameo:
Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 6

Scan N Cut:
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1

Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s

Graphtec:
Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 30 cm/s

Applications

EasyWeed Extra Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather
Nylon
Lightly siliconed nylon
Spandex

Heat Applications

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold

Care Instructions

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean
No chlorine bleach

You may also like…