Company Logo

15in EasyWeed Electric 1 to 50 Yard Rolls

15in EasyWeed Electric 1 to 50 Yard Rolls

Bulk pricing available. Select your options below to begin.



Earn up to 10 Points Points.

Product Description

EasyWeed® Electric Heat Transfer Vinyl

Electrify Your Look with Unique Finishes

If you’re looking to take your designs to the next level, EasyWeed Electric has a finish or pattern just for you! You’ve never seen a heat applied material like EasyWeedElectric. The colors are vibrant with a pearlescent metallic sheen. EasyWeed Electric comes on a pressure-sensitive carrier which makes cutting detailed designs and logos a breeze. EasyWeed Electric is durable wash after wash and maintains its bright color and brilliant finish. If you’re looking to provide multi-color designs, EasyWeedElectric can be layered.

EasyWeed Electric is CPSIA Certified, so it can be used for decorating items intended for children.

1-4 Yards – $ 9.99 per yard
5-9 Yards – $ 8.00 per yard (for example 5 Yards would be $ 40.00)
10-24 Yards – $ 7.30 per yard (for example 10 Yards would be $ 75.00)
25-49 Yards – $ 7.28 per yard (for example 25 Yards would be $ 182.00)
50 Yards – $ 7.10 per yard (for example 50 Yards would be $ 355.00)

**Due to the manufacturing process, material may vary in width by 1/8-1/4″



PU Composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns/3.5 Mils • 45°/60° blade • Can be layered

Suggested Cutter Settings:

Blade: Standard
Setting: Iron-on

Silhouette Cameo:
Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 6

Scan N Cut:
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1

Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s

Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 30 cm/s


EasyWeed Electric Applies to:

100% cotton
Poly/cotton blends
100% polyester

Heat Applications

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 15 seconds
• Peel carrier hot or cold

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold

Care Instructions


Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean
No chlorine bleach