Company Logo

12in EasyWeed Adhesive (For Foils) Sheets

12in EasyWeed Adhesive (For Foils) Sheets

Bulk pricing available. Select your options below to begin.

Out of stock

SKU: ewAdhesiveS Categories: , ,

Product Description

EasyWeed® Adhesive

Create Shining Decorations For Less!

EasyWeed Adhesive lets you create a trendy style without breaking the bank. The milky colored adhesive shares benefits of EasyWeed such as a pressure sensitive carrier and low application temperature. Therefore, the standard cutting process for cuttable materials is used when working with EasyWeed Adhesive. Weeding on a dark surface will provide the best visibility.

EasyWeed Adhesive is CPSIA Certified, so it can be used for decorating children’s clothing and apparel.

Double Sided Heat Transfer Vinyl which is GREAT for our MSCS Colored & Patterned Foils!

Click Here for Siser Tutorial >

Click On Video Tab to see how MidSouth Crafting Supplies does it! 🙂


PET Composition • Pressure sensitive backing • Semi-gloss finish • 75 Microns/2.95 Mils • 45°/60° blade • Should be layered

Suggested Cutter Settings:

• Blade: Standard
• Setting: Iron-on

Silhouette Cameo:
• Blade: Standard, 3
• Material: Heat Transfer, Smooth
• Speed: 8
• Force: 6

Scan N Cut:
• Blade: Standard, 2
• Cut Speed: 1
• Cut Pressure: 1

Roland GS/GX-24:
• Blade: 45°
• Force: 80g-90g
• Speed: 25-50 cm/s


EasyWeed Adhesive Applies to:
• 100% cotton
• Poly/cotton blends
• 100% polyester

Adhesive Application:
Cut design in reverse with standard blade and settings – weed excess material
Press to 300F and prepress garment for approximately 2-3 seconds
Adhesive transfer face down on garment
Place cover sheet over design and press for 3-5 seconds using light pressure
Peel immediately while transfer is HOT

Foil Application:
Cut foil sheet slightly larger than total design area
Place foil (colored/foil side face up) and place cover sheet over design
Press at 300F with firm pressure for approximately 8-10 seconds
Remove foil liner once garment and transfer have completely cooled

Heat Applications

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 275°F/135°C
• Use medium pressure for 5-10 seconds
• Peel carrier hot
Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5 seconds
• Peel carrier hot

Care Instructions


• Wait 24 hours before 1st wash
• Machine wash cold / mild detergent
• Dry on normal dryer setting
• Do not dry clean


You may also like…